vectra heman 175
close button
Vectra Heman 175C: Skid Steer Loader Brand in India | Europe

ENGINE

Cummins B 3.3C NA 4 cylinder in line
Liquid Cooled
Gross Power @ 2200 rpm 60 HP

HYDRAULICS

Hydromotors EATON ( USA )
Pump REXROTH with Flow 70 l/min
working pressure 175 bar

PERFORMANCE

Rated Operating capacity 750 kgs
Tipping Load 1500 kgs
SAE Operating Weight 3070 kgs
Standard Bucket 0.46 cum
Max Dump Height 2830 mm
Travel Speed 0 – 10 km/hr

Features

Transmission

Type Hydrostatic
No. of motors 2
Drive method Gearbox
Steering 2 Levers
Tyres - Standard 10.0-16.5 8PR
Tyres - Optional 10.0-16.5 10PR
Max. travel speed 10 kmph

Specification

Type Hydrostatic
SAE Operating weight 2935 Kgs
Standard bucket capacity 0.46 cu m
Maximum lift height 3020 mm
Time to raise lift arms fully 3-5 Sec.

Standard Features

  1. Auxiliary hydraulics
  2. Cab - swing up
  3. Tubeless tyres
  4. Key stop
  5. Lift arm stop
  6. Lifting eyes
  7. Working light
  8. Quick hitch
  9. Roof window
  10. Safety bar
  11. Seat belt
  12. Air cleaner restriction
  13. All weather cab with front door lock
  14. Operator face fan
  15. Rear view mirrors
  16. Wiper motor
  17. Sound & heat shield
  18. Battery charge
  19. Charge pump pressure
  20. Coolant temperature gauge
  21. Engine oil pressure
  22. Fuel level gauge
  23. Hour counter
  24. Hydraulic oil temperature gauge
  25. Cabin light
  26. Heater glow indicator
  27. Hydraulic clog indicator
  28. Fuel clog indicator
  29. Water spray for wiper
  30. Head lights with side indicators
  31. Seat heating
  32. Reverse alarm
  33. 3 chamber tail lamps

Diemensions

A Length with bucket 3345 mm
B Length without bucket 2570 mm
C Width over tyres 1650 mm
D Overall height 2080 mm
E Ground clearance 190 mm
F Departure angle rear 26°
G Wheelbase 1023 mm
H Turning radius bucket corner 2565 mm
J Turning radius rear corner 1990 mm
K Pin height 3000 mm
L Dump angle 37°
M Dump height 2300 mm
P Roll back at ground 28°
Q Max reach at full height 3935 mm
R Bucket width (standark) 1708 mm
blank