vectra heman 175
close button
Vectra Heman 175 - Excavator Manufacturers in India | Europe

ENGINE

Simpsons TSJ 436 Turbo charged 4 cylinder in line
Liquid Cooled
Gross Power @ 2200 rpm 60 PS

HYDRAULICS

Hydromotors EATON ( USA )
Pump EATON with Flow 80 l/min
working pressure 175 bar

PERFORMANCE

Rated Operating capacity 600 – 750 kgs
Tipping Load 1200 – 1500 kgs
SAE Operating Weight 3050 kgs
Standard Bucket 0.46 cum
Travel Speed 0 – 10 km/hr

Features

Transmission

Type Hydrostatic
No. of motors 2
Drive method Gearbox
Steering 2 Levers
Tyres - Standard 10.0-16.5 8PR
Tyres - Optional 10.0-16.5 10PR
Max. travel speed 10 kmph

Specification

Type Hydrostatic
SAE Operating weight 2935 Kgs
Standard bucket capacity 0.46 cu m
Maximum lift height 3020 mm
Time to raise lift arms fully 3-5 Sec.

Standard Features

  1. Auxiliary hydraulics
  2. Cab - swing up
  3. Tubeless tyres
  4. Key stop
  5. Lift arm stop
  6. Lifting eyes
  7. Working light
  8. Quick hitch
  9. Roof window
  10. Safety bar
  11. Seat belt
  12. Air cleaner restriction
  13. All weather cab with front door lock
  14. Operator face fan
  15. Rear view mirrors
  16. Wiper motor
  17. Sound & heat shield
  18. Battery charge
  19. Charge pump pressure
  20. Coolant temperature gauge
  21. Engine oil pressure
  22. Fuel level gauge
  23. Hour counter
  24. Hydraulic oil temperature gauge
  25. Cabin light
  26. Heater glow indicator
  27. Hydraulic clog indicator
  28. Fuel clog indicator
  29. Water spray for wiper
  30. Head lights with side indicators
  31. Seat heating
  32. Reverse alarm
  33. 3 chamber tail lamps

Diemensions

A Width over tyres 1650 mm
B Bucket width (Standard) 1708 mm
C Overall height 2085 mm
D Departure angle rear 23°
E Ground clearance 185 mm
F Wheel base 1023 mm
G Length without bucket 2410 mm
H Length with bucket 3450 mm
I Roll back at ground 27°
J Dump angle 40°
K Dump height 2160 mm
L Pin height 3020 mm
M Max. reach at full height 3950 mm
N Turning radius rear corner 2055 mm
blank